The History of Computer Hardware
I’m going to take you off on a journey through the history of computer hardware. No, it is not a journey to Silicon Valley, but to old-time computing. This is a journey to the beginning of computing. It is a journey through the history, the progression from our current digital technology to the very first hardware we had to deal with in our lifetimes. So go ahead, let’s take a look at the history of computing.
The first computer that we had was the computer before the term was invented. It was called an ALMOST-ONE (or ALO). It was a small single-board computer that had an oscilloscope and two flip-flops to control the tape motor and read output from the tape; it was connected to a single-digit mega-bit of serial communication.
It was around the same time in the same country that we had the first radio transmission of a commercial broadcast. That was broadcast over the airwaves in 1938. It wasn’t much of a difference. It is still used today in radio to communicate from one network of radio transmitting stations to another.
We had another computer around that same time. It was called the PDP-1 and it was a big, two-pound, one-year-old computer. It was very simple. It had a screen, a keyboard, and three rows and columns of numbers on it for entering the numbers. The screen was just a thin sheet of glass attached to a board of tiny plastic and aluminum circuits.
The PDP-1 was connected to a PDP-1/2 computer by a standard computer interface called a port, or bus, on the outside of the computer. The two were connected by a serial cable. It was very easy to use. It seemed like an ordinary little machine for a little change.
Now, this is an entirely different story. This was in 1972. We had the first computer with memory. We had the first microprocessor. We had the first memory. Even though the computer was very small and low-speed, it was amazing. It meant that we could actually do some work. The fact that we could do very powerful calculations also made it even more interesting.
I’m going to read off the first memory.
My Tapestry diary
“So, I was doing a Google Search for “What is a tapestry”, which obviously led to me using that very site and I learned two things, one of which is that there is actually a tapestry. com, where you can upload your tapestry to be displayed, and the second is that you can make a tapestry that is not only unique, but also has a history. You know I have done that before, and it was a huge pain because I had to do a Google Search to find a tapestry and then I had to sit there and think about it and I can’t wait for my tapestry to get released. It’s a huge pain but I’m working on it. I’m hoping to release it in early October.
This entry was posted in Computer Hardware T-Shirts, tagged Computers, T-Shirts. Comments are welcomed and encouraged. Submissions are moderated and will not be posted until the close of posting. Questions? Contact gizmosupport at gmail dot com.
The Internet has had it’s day of glory with our electronic mail, fax, and electronic documents, but we are still in shock at the impact of the “wireless” world. There is something very magical about the idea of an electronic message in our hand. The speed at which information can be transmitted, and the ability to create a message and instantly send it—and have that message appear in the palm of your hand—amazing things. It is indeed quite magical.
The original thought was that a message would be sent from one person to another, as a text message, but when it was discovered that this would take an incredible amount of time to transmit, this idea was scrapped. In 2002 many businesses decided that the use of fax machines was making it difficult to communicate within an organization. In response to this, someone (it was probably the IBM executive, Eric Bauchoff) came up with the idea of sending an electronic fax using a computer instead.
This idea of using a fax machine as a quick and easy way to transmit a message was never intended to replace the use of a standard telephone line.
The Fire and Change the Shed.
Article Title: The Fire and Change the Shed | Computer Hardware. Full Article Text: The Fire and Change the Shed Computer Hardware of the new ‘Year in Software’ Year-In-The-Life of an IT Professional, written by Michael Miller, covers the latest in IT hardware, the latest in software, the latest in OSes and the latest in Internet browsers. It takes a look at each piece over the course of a single year of professional IT hardware and software. It includes a detailed analysis of the products, the software, the OSes and the programs; the hardware and the OSes, the browsers and the programs; then the Internet browsers and the OSes, the applications and the software, until the end of the year. The Fire and Change the Shed – What’s All The New Stuff? The Internet has changed our lives and so has software and the hardware we depend upon it for. The Fire and Change the Shed provides an in-depth analysis of the newest technology, software and hardware from the first days of the year to December 31, 2003. The Fire and Change the Shed provides a detailed analysis of the newest technology, software and hardware from the first days of the year to December 31, 2003. It includes a detailed analysis of the products, the software, the OSes and the programs; the hardware and the OSes, the browsers and the programs and the Internet browsers. The Fire and Change the Shed – What’s All The New Stuff? For the last four years the Internet has changed our lives and so has software and the hardware we depend upon it for. The Fire and Change the Shed provides an in-depth analysis of the newest technology, software and hardware from the first days of the year to December 31, 2003. The Fire and Change the Shed – What’s All The New Stuff? The Fire and Change the Shed – What’s All The New Stuff? is a comprehensive guide to the most current software and hardware that is changing our lives. This guide is based on a year-by-year analysis of what is new in IT, how software and hardware is changing, and what is the market for software and hardware.
Colorado backpacking trips.
Article Title: Colorado backpacking trips | Computer Hardware.
Backpacking with other people? Do you like to “camp with people” more than alone? If so, the right trip for you might be spending a few days with a group of friends and/or family in Colorado. Perhaps you can help make the trip special by cooking breakfast, helping with the packing, and/or cleaning up after the trip.
Colorado has a reputation as a good place to “camp, party and stay in” and you might want to think about the possibilities a backpacking trip to Colorado might bring for your next trip.
You will be on your own for most of the trip.
Being on your own for the time in Colorado will give you the freedom to explore more of Colorado’s natural and cultural resources without being supervised or directed by others.
You might be out hiking in the backcountry.
Some of the most spectacular hikes in Colorado are in the backcountry and you will be able to enjoy them with minimal human interference.
Hiking can be challenging and can be dangerous in the backcountry so it might not be a wise idea for you to plan a backpacking trip to Colorado where you have other people to take over the responsibility of hiking or backpacking.
Be prepared for mosquitoes.
Mosquitoes are very common in northern Colorado and you might want to take common sense precautions when planning a backpacking trip to Colorado. This includes not staying outside if the weather is forecasted to be hot or humid in the mountains for several days.
A backpacking trip in Colorado is a lot like a backpacking trip in other locales. Bring mosquito repellent as a backup. You will also want to bring mosquito netting for the roof of your tent, and plenty of bedding to protect your sleeping bag and belongings.
A good backpacking trip to Colorado will include at least two days of hiking and backpacking.
If you plan to hike in the backcountry, stay in the national forest. Do not hike in mountain passes. Hiking in national forests in Colorado require a permit that is available at the park entrance.
Tips of the Day in Computer Hardware
The following are a random collection of tips and tricks, for the most recent releases. This is actually a sort of Top Ten of the week.
Today’s tip comes to us from the owner of the wonderful and highly unusual (for us as well as anyone else) hardware known as the Raspberry Pi. We have been playing with the device (and the rather fantastic port called the RPi-Hacking Channel) using the included software from that website, to try to get a better understanding of the software’s capabilities. In this article, I will try to explain how the RPi works behind the scenes, and how you can get the low-level programming (and perhaps some other tricks) using the appropriate libraries like the PyPiHacking Python module. Please note that this is a low-level, programming-centric article. The reason I am posting it here is to show you how awesome the RPi is, and the wonders it has the potential for.
Before continuing, you might want to get your hands on the latest version of RPi-Hacking.
Related Posts:
Spread the loveI’m going to take you off on a journey through the history of computer hardware. No, it is not a journey to Silicon Valley, but to old-time computing. This is a journey to the beginning of computing. It is a journey through the history, the progression from our current digital technology to the…